Price: $16.99
(as of Mar 13, 2025 09:52:39 UTC – Details)
Product Description
Here is the text installation guide 
NOT applicable to R8000/R8050/R9070/R9150/R9160 3rd generation E transmission
How to install the shifter hose, brake hose, oil hose, etc.？ —-Use Line(2)
using main magnet(4) to guide (2) （magnet+guide wire）through the frame and out of the framewhen (2)out of frame，connect the tube that you want to install（shifter\ brakes\oil tube etc）pulling (2) straight out of frame another exit. The length of the (2) cable is 200 cm and will fit through your frame normally.
how to install inner cable ？—-use line(1)
use in the same way as the line (2) in step 1 and out of the framePlace the inner cable at the inner cable adaptor(1) and press down with the DI2 adaptor (3) ,so that the inner cable does not fall off as it passes through the frame
How to install DI2 E-tube？
Link the line (1) and adaptor (3) together, then connect to the DI2 wire connector and use the main magnet to lead out of the frame
OLD version and NEW version all work very well. 
Old version
Old version: the main magnet and the magnets of line 1 or line 2 attract each other on the end , repel each other on the side 
New version
New version:the main magnet and the magnets of line 1 or line 2 repel on the end , attract at the side.
Some details about the tool： 
to guide line out of the frame
IF it is difficult to pull out the guide wire (1)/(2) with the main magnet from the frame exit, then you can use the exit guide wire (5) 
ensure have connected
When it is connected the wire and you move the main magnet, the wire inside the frame make a “noise” as they move. 
Lead lines from top to bottom
It is easier to install and guide line 1 or line 2 from the top to bottom. 
about the DI2 adapter
Not applicable to R8000/R8050/R9070/R9150/R9160 3rd generation electronic transmission.
If there is already an oil hose/inner cable in the bicycle frame
When you moving the main magnet, you may encounter oil hose in the frame that may cause the magnetism to break and prevent movement.
Please try several times, while using the main magnet to attract, and push the guide line at the end with your hand to keep the guide line moving 
A list of bikes that cannot use this tool: 
Note: Aluminium bicycles with some iron in the frame part can also be used
cable routing kit includes: 1* main magnet(green)，1*Inner cable/DI2 E-tube guide wire(include magnet and adaptor)，1*shifter brakesoil tube guide wire (include magnet and adaptor)，1*Di2 E-tube adaptor，1*exit guide wire(30cm) ，1*installation manual
Regarding installation and use: There is an installation manual inside the box, available in English and German versions. Additionally, you can refer to our detailed pages and videos.
NOTE：our DI2 E-tube adaptor NOT applicable to R8000/R8050/R9070/R9150/R9160 3rd generation electronic transmission
Installation suggestion: you can push the wire through the frame halfway and then start using the main magnet to guide it. You can directly use the main magnet to lead it out or use the exit guide wire to lead it out the frame.
Installation details: If other tubes are already installed in your frame, it may be difficult to guide. our RECOMMEND that use the main magnet to attract and the other hand to assist in propulsion during installation when you guide the wire.
Reviews
There are no reviews yet.